SPX Flow Single Tower Natural Gas Dryers FSD Series dryers
CDA Systems is proud to partner with a large share of the major players in Silicon Valley and throughout California. We will work with you and SPX Flow to customize the best solutions for your dryer needs and specifications.
The Natural Gas Dryer FSD Series includes FSD-A, FSD-T, and FSD-M. This series of compressed natural gas dryers removes water vapor, protecting critical downstream components, including gas compressors, storage vessels, distribution lines and dispensing equipment. High performance particle and coalescing filters remove sub-micron contaminants, further conditioning the natural gas for efficient use.
Single Tower Drying FSD-A Series
SPX Flow FSD-A Series dryers are designed to efficiently remove water vapor and extraneous contaminants from Compressed Natural Gas. SPX Flow FSD-A Series dryers include a stationary regeneration package for convenience, eliminating rental costs and scheduling delays for third party regeneration.
SPX Flow FSD-A Series dryer standard capacity range is 10 SCFM to 5,000 SCFM. Other flows are available. Minimum Inlet Pressure: 5 PSIG Max. Operating Pressure: 180 PSIG; Inlet Temperature Range: 40° F to 100° F (4° C - 38° C); 460 or 575V, 3Ph, 50 or 60Hz.
SPX Flow FSD-A Series dryers are an economical alternative to twin tower drying systems in CNG vehicular fueling stations. Coalescing and particulate filters are included for, scale, liquid aerosol and desiccant fine removal, further enhancing drying performance and gas quality. Specifically engineered for NGV fleet refueling applications with low to medium flow.
SPX Flow FSD-T Series twin tower purification systems
SPX Flow FSD-T Series twin tower purification systems are completely self-contained, fully automatic, heat-reactivated, closed-loop blower purge desiccant dryers designed to remove water vapor from natural gas. Using molecular sieve as the drying media, these systems will continuously dry CNG down to an outlet moisture content of 0.5 lbs/MMscf, or lower.
SPX Flow FSD-T Series twin tower purification systems capacity range is 200 SCFM to 10,000 SCFM, with minimum inlet pressure of 5 PSIG maximum operating Pressure of 180 PSIG with inlet temperature range 40 to 100°F (4 - 38°C);460 or 575V, 3Ph, 50 or 60Hz. Designed for applications and specifically engineered for large flow (>200 SCFM) heavy- duty NGV fleet refueling applications, FSD-T Series Twin Tower systems provide dry CNG 24 hours a day.
SPX Flow FSD-T Series tower purification systems feature Certified Quality Assurance - ASME Section VIII designed pressure vessels and piping designed per ASME B31.3 and three-valve block; bypass piping for dryer isolation; ease of service and superior corrosion resistance with removable stainless-steel diffusers. The down-flow drying eliminates fluidization to extend desiccant life.
Single Tower Drying FSD-M Series
Single Tower Drying FSD-M Series dryers are designated to efficiently remove water vapor and extraneous contaminants from Compressed Natural Gas with flow ranges from 200 SCFM to 2,450 SCFM . Single Tower Drying FSD-M Series dryers are an economical alternative to a drying system with an on-board regeneration package. These dryers are suggested for use on CNG vehicular fueling stations which see intermittent or low gas flow rates. Coalescing and particulate filters are included for particulate, scale, liquid aerosol and desiccant fine removal, further enhancing drying performance and gas quality.